-
Alle Produkte
-
Flat pack displays
-
Plakat-Rahmen
-
Rahmen Serie 1
-
Rahmen Serie 2
-
Zubehör für Rahmenserien 1 und 2
-
Base for vertical or inclined fixing of series 1 frames
-
Suspension hook
-
Suspension ring parallel, D 8 mm, for frames series 1 and 2
-
Frame connector for same frames series 1 or 2
-
Promotion card clip
-
Interconnection accessory at various angles for frames series 1 and 2
-
Tube clips for frames series 1, fixing on various diameters
-
Tube clip, swivel type, 85 mm, for frames series 1 and 2
-
Tube clips for frames series 2, fixing on various diameters
-
Adhesive fastener with rotary clip for frames series 1 and 2
-
Retaining clip
-
Flexible clip with adhesive for frames series 1 and 2
-
Perpendicular adaptor, fixing on magnetic fastener RAP 184-01
-
Accessory for hanging lateral or superior on wire structures
-
Shelf holder with M5 screw for frames series 1 and 2
-
Parallel adaptor, fixing on magnetic fastener RAP 184-01
-
Fixed magnetic fastener 36x32 mm, parallel display
-
PVC "U" poster pocket
-
PVC transparent protective covers
-
Black chalk board
-
T-piece for series 1 frames and 9 mm or 10 mm D tubes
-
Clamps
-
Pipe-clip to fix "T" piece, adjustable diameters
-
Flexible clip with g-clamp, for frames series 1 or 2
-
Plakatständer
-
K stand with plastic base of 150x200 mm, steel rod, "T" piece and frame
-
Showcard stand N with steel base 160x185 mm, steel tube, "T" piece and frame
-
Showcard stand kb with plastic base with metallic inlaye, 160x200 mm, steel tube, "T" piece and frame
-
Showcard stand k-eco with plastic base 124x210 mm, aluminium tube, "T" piece and frame
-
Clear K stand with plastic base, 160 mm diameter, plastic rod and "T" piece for A4P, A5P pockets
-
K stand with round plastic base, 160 mm diameter, steel rod, "T" piece and frame
-
L stand with round plastic base and rubber cup, 160 mm diameter, steel rod, "T" piece and frame
-
Stand with plastic base of 150x200 mm, steel rod and "U" frame made of plastic for A4L/A3L
-
Showcard stand eco with plastic base 180x230 mm, telescopic plastic tube and "t" piece
-
SILVER 1 stand with steel base of 160x200 mm, aluminum rod and "T" piece
-
SILVER 2 stand with plastic base of 120x250 mm, telescopic rod made of aluminum and "T" piece
-
Deko stand with pyramid base
-
Spring stand for wire baskets
-
DK stand that fits on wire structures, telescopic aluminum tube, "T" piece and plastic frame
-
Aluminum display stand with one arm or two arms, without base
-
BD stand with Deko frame, aluminum rod, triangular "T" piece, witout steel base
-
Showcard stand with standard frame, t piece, steel tube and without the steel base
-
Stäbe, Sockel und anderes Zubehör
-
fixed chromium tube 10+12 mm diameter
-
Telescopic chromed tubular rod 10+12 mm diameter
-
GFK telescopic rod made of fiberglass-reinforced plastic, 9+12 mm diameter
-
Aluminum tubes with heights of 800 and 1000 mm
-
K plastic base, 200x150 mm, for tubes of 12 mm diameter
-
KL plastic base, 140x90 mm, for tubes with 6 mm or 12 mm diameter
-
Round plastic base, 160 mm diameter, for tubes of 12 mm diameter
-
Stainless trapezoid base nt 165(80)x160x1,5 mm, for tube with 12 mm or 14 mm diameter
-
Deko II plastic base with metal insert
-
Deko I plastic base with metal insert
-
Magnetic plastic base, for tubes of 12 mm diameter, 100x40 mm
-
Corner connector for tubes 10 mm or 12 mm diameter
-
"T" connector for tubes with 10 mm or 12 mm diameter
-
Telescopic aluminium tube with screw connector, 9+12 mm diameter
-
Infoline
-
Rahmen und Zbehör der Serie 5
-
Aluminium Rahmen
-
Rahmen für Einkaufswagen
-
Preisauszeichnung
-
Etikettenhalter
-
Halter für Menüs und Plexiglastaschen
-
PVC – Taschen und Accessoires
-
PVC-Einschubfächer, 0,15 mm und 0,18 mm, unterschiedliche Abmessungen
-
C-Einschubfach aus steifem PVC mit Antireflexbeschlag, A7, A6, A5, A4, Hochformate magnetisch oder haftend.
-
PVC-Einschubfächer mit 2 Druckknöpfen zum Aufhängen, A4, A3, A2, A1, Hochformate und andere Abmessungen
-
Kartenhalter und andere Präsenter
-
Etikettenhalter „Reflex“
-
Saugnäpfe
-
Kreidetafel Stifte
-
Kreidemarker Illumigraph, abwaschbare Tinte
-
Laundry Marker mit 0,7 und 0,8 mm Spitze, permanent und semipermanent
-
Kreidemarker, Posterman, wasserfeste Tinte
-
Wasserfester Posterman-Marker, Spitze 0,5 mm, 1 mm und 2 mm
-
Zig Opaque Pens, Stärke der Spitze zwischen 0,05 mm und 3,5 mm
-
Fabricolor mit 2 mm Spitze
-
Marker Posterman wet-wipe
-
Etikettenhalter für Bekleidung und Lederwaren
-
Etikettenhalter für das „Slatwall“ System
-
Supergreifer
-
Regalstopper
-
Abhängesysteme
-
Prospekthalter und Werbeträger
-
Display Produktion
-
Regalorganisation
-
Fachteiler Systeme
-
Prima shelf dividers
-
Aqua shelf dividers
-
Fachteiler 60 mm hoch, "T"-Front und zwei Befestigungspunkte
-
Fachteiler 120 mm hoch, "T"-Front
-
Fachteiler 180 mm hoch, "T“ oder "L"-Front, unterschiedliche Längen
-
Extensible dividers with 60 mm height, "T" or "L" front with 30 or 60 mm height, two fixing points
-
Ausziehbare Fachteiler 120 mm hoch, "T“ oder "L"-Front 75 mm oder 120 mm hoch, zwei Befestigungspunkte
-
Extrudierte "T"-Fachteiler, 50 mm, 80 mm, 125 mm hoch
-
Profile zur Befestigung von Waren-Pushern
-
Waren-Pusher Systeme
-
Zubehör an der Hinterseite von Pusher Prima
-
Fronten für Pusher Vario B18 und B30
-
Gleitprofil, ohne Bohrung
-
Prima Roller-System
-
Pusher Slim ohne Front, Gleitschiene L 380 mm
-
Slim pusher with front, sliding rail 380 mm length
-
System manueller Pusher aus 4 Teilen
-
Vario system: B18 pusher with 4 N strength, H 40 mm divider, sliding rail
-
Vario system: B30 pusher with 6 N strength, H 40 mm divider, sliding rail
-
Vario System: Pusher B18 Kraft 2 N, Fachteiler H 40 mm, Gleitschiene
-
Vario System: Pusher B18 Kraft 6 N, Fachteiler H 40 mm, Gleitschiene
-
Vario System: Pusher B30 Kraft 2 N, Fachteiler H 40 mm, Gleitschiene
-
Vario System: Pusher B30 Kraft 4 N, Fachteiler H 40 mm, Gleitschiene
-
Regal-Organizer mit leicht abgerundeter Front
-
Produktpräsentation
-
Helfer für die Infrastruktur
-
Corporate-Wear Bekleidung für das Firmenimage
-
STOP COVID-19
